The Stop Clustering page for this access point opens.
2 Click the Stop Clustering button.
3 Repeat steps 1 and 2 for every access point in the cluster.
Caution Do not proceed to the next step of resetting any access points until you have stopped clustering on all of them. Make sure that you first “Stop Clustering” on every access point on the subnet, and only then perform the next part of the process of resetting each one to the factory defaults.
4 Reset each access point by going to the Administration Web pages of the access point you want to reset by entering its URL into the address bar of your Web browser:
http://IPAddressOfAccessPoint/
Where IPAddres0sOfAccessPoint is the IP address of the access point you want to reset.
www.gateway.com | 47 |