Gateway 7001 Series Reviewing and describing the access point

Reviewing and describing the access point

Field	Action

IP Address	This box is not editable because the IP address is
	already assigned (either through DHCP, or statically
	through the Ethernet (Wired) settings as described in
	“Configuring Guest interface Ethernet settings” on
	page 73).

MAC Address	A MAC address is a permanent, unique hardware
	address for any device that represents an interface to the
	network. The MAC address is assigned by the
	manufacturer.
	You cannot change the MAC address. It is provided here
	for informational purposes as a unique identifier for an
	interface.
	The address shown here is the MAC address for the
	bridge (br0). This is the address by which the AP is
	known externally to other networks.
	To see MAC addresses for guest and internal interfaces
	on the AP, see the Status > Interfaces tab.

Firmware	Version information about the firmware currently installed
Version	on the access point.
	As new versions of the Gateway 7001 Series
	self-managed AP firmware become available, you can
	upgrade the firmware on your access points to take
	advantages of new features and enhancements.
	For instructions on how to upgrade the firmware, see
	“Upgrading the firmware” on page 168.

Location	Specify a location description for this access point.