Configuring a wireless interfaceNavigating to wireless settings

To set the wireless address for an access point, click Advanced > Wireless Settings on the Administration Web page, and update the boxes as described in the following section.

Important The following illustration shows the Wireless settings page for the dual band AP (Gateway 7001 802.11 A+G Wireless Access Point). The Administration Web page for the single band AP (Gateway 7001 802.11 G Wireless Access Point) will look slightly different.

Configuring the radio interface

The radio interface lets you set the radio Channel and 802.11 mode as described in the following table.

Important On the dual band AP (Gateway 7001 802.11 A+G Wireless Access Point), you must configure these radio interface settings for both Radio Interface One and Radio Interface Two.

74

www.gateway.com