2 Click Next to search for access points. Wait for the search to complete, or until KickStart has found your new access points.

Important If no access points are found, Kickstart indicates this and presents some troubleshooting information about your LAN and power connections. After you have checked hardware power and Ethernet connections, you can click the Kickstart Back button to search again for access points.

3 Review the list of access points found.

KickStart will detect the IP addresses of Gateway 7001 Series self-managed APs. Access points are listed with their locations, Media Access Control (MAC) addresses, and IP Addresses. If you are installing the first access point on a single-access-point network, only one entry will be displayed on this screen.

Verify the MAC addresses shown here against the hardware labels for each access point. This will be especially helpful later in providing or modifying the descriptive location name for each access point. Click Next to continue.

4 Go to the Access Point Administration Web pages by clicking the link provided on the KickStart page (see “Logging on to the administration Web pages” on page 24).

www.gateway.com

23