Interfaces

To monitor wired LAN and wireless LAN (WLAN) settings, select the access point you want to monitor on the Administration Web page, then click Status > Interfaces. The View settings for network interfaces screen opens.

Important The dual band AP (Gateway 7001 802.11 A+G Wireless Access Point), shows current wireless settings for both Radio One and Radio Two. The single band AP (Gateway 7001 802.11 G Wireless Access Point) shows settings for one radio only.

The Interfaces page for the dual band AP is shown in the following figure.

This page displays the current settings of the Gateway 7001 Series self-managed AP. It displays the Ethernet (Wired) settings and the Wireless settings.

www.gateway.com

159