Error message

Solutions

Insert bootable media device

See “The system does not recognize a SCSI drive” on

 

page 89 for a possible solution.

 

Backup your files as soon as possible.

 

 

Insufficient disk space

Check the free space on the disk volume. If the volume is

 

full or almost full, remove unnecessary files.

 

 

Invalid configuration

Open the BIOS Setup utility, then make sure the settings

information

are correct.

 

 

Invalid password

Enter your password again, make sure to enter it correctly.

 

Be aware that some passwords are case sensitive.

 

If you do not know the password, you may need to reinstall

 

the software you are trying to access.

 

Startup passwords are stored in BIOS. If this password has

 

been set and is unknown, you may be able to reset the

 

password via system board jumper settings.

 

 

Keyboard clock line failure

Try a working keyboard.

 

Make sure that the keyboard is compatible with the system.

 

You may have to change the switch setting to AT.

 

 

Keyboard controller failure

Try a working keyboard.

 

Make sure that the keyboard is compatible with the system.

 

You may have to change the switch setting to AT.

 

 

Keyboard not detected

See “The keyboard does not work” on page 94 for a

 

possible solution.

 

Turn off the system, then check the keyboard cable.

 

 

Keyboard stuck key failure

Remove any objects that may be resting on the keyboard,

 

then restart the system.

 

Check for sticking keys. Clean the keyboard if necessary.

 

 

Memory errors were

See “The system detected memory errors during start up”

detected while the system

on page 89 for a possible solution.

powered up

 

 

 

Memory size error

Enter the BIOS Setup utility and save the memory

 

configuration.

 

 

Non-system disk or disk error

Eject the diskette, then press ENTER.

 

If the diskette is bootable, check it for errors.

 

 

Not enough memory

Close all programs that are not currently in use.

 

 

Print queue is full

Wait until the current print job has completed before sending

 

another print job.

 

If you receive this error often, you need to add memory to

 

the printer.

 

 

Error messages

99