Processors

The system is compatible with the Intel® Pentium® III 600 MHz and faster processors with 100 MHz front-side bus (FSB). As many as two processors may be installed in the system. You do not need to install additional voltage regulator modules (VRMs), because the VRMs for both processors are built into the system board.

Replacing a processor

When replacing a processor, order a processor upgrade kit from Gateway. The kit includes the processor, a fansink or heatsink, and a disposable grounding wrist strap.

Caution

A heatsink or fansink must be installed on each processor.

 

Installing a processor without a heatsink or fansink could

 

result in damage to, or failure of, the processor.

 

 

To replace a processor:

1Turn off the system and disconnect the power cord and all external peripheral devices.

2Open the case by following the instructions on page 18. (See “Preventing static electricity discharge” on page 17.)

3Disconnect the processor fan cable from the processor fan connector on the system board.

Processors 37