Replacing and

Adding Internal 4

Devices

Drives

There are several types of drives and similar devices that can be installed in the server.

Preparing to replace or add a drive

One 3.5-inch diskette drive, at least one 1-inch high 3.5-inch hot-plug hard drive, and one slimline CD drive are included with the server. You can add up to three additional 3.5-inch hot-plug drives for a total of four hot-plug drives.

As you prepare to install drives, keep the following in mind:

■If you remove a drive, place it in an antistatic bag or container.

■Before you install a drive, see the drive documentation for information on configuring the drive, setting any jumpers on the drive, and attaching cables to the drive.

■If you are installing a drive that uses an add-in controller, install the expansion card before you install the drive.

■You may need to configure the drives you install using the BIOS Setup utility or the SCSISelect utility. Press F2 at start up to open the BIOS Setup utility or press CTRL+A to enter the SCSISelect utility.

Drives 23