4Install the new drive in the carrier using the four screws you removed in Step 3.
5Align the drive rails with the slots at the sides of the drive bay. Leave the retention lever in the open position.
6Push the drive all of the way into the drive bay until the retention lever starts to close because of contact with the front of the chassis. Make sure the hooks on the side of the retention lever latch on the side of the drive bay and firmly close the lever.
7Run any necessary utilities to setup the new drive. See the utility software documentation for details.
Replacing the slimline CD drive
The slimline CD drive is located below the diskette drive on the left side of the front panel.
To replace the slimline CD drive:
1Turn off the system and disconnect the power cord and all other external peripheral devices.
2Open the case. (See “Opening the case” on page 18 and “Preventing static electricity discharge” on page 17.)
30Replacing and Adding Internal Devices