Replacing the power distribution board

The power distribution board is beside the power supply and serves to separate the power produced by the power supply into the voltages needed by the various internal components.

To replace the power distribution board:

1Turn off the system and disconnect the power cord and external peripherals.

2Open the case. (See “Opening the case” on page 18 and “Preventing static electricity discharge” on page 17.)

3Remove the power supply as described in “Replacing the power supply” on page 51.

4Unplug the cables that connect the power distribution board to other system components. Note the location and orientation of each cable before you remove it.

5Remove the four screws that secure the board to the chassis, then remove the power distribution board.

Screws

Replacing the power distribution board

53