Important!

66 Mhz front-side bus (FSB) processors can be paired with 66 or 100 MHz SDRAM, but 100 MHz FSB processors should be paired only with 100 MHz

SDRAM.

Replacing the Processor

The system is compatible with the Intel Pentium® II 100 MHz front-side bus (FSB) and 66 MHz FSB processors.

The system board will support the following processor/bus configurations:

•233/66

•266/66

•300/66

•333/66

•350/100

•400/100

•450/100

It is critical that a heat sink be installed on each processor to provide sufficient cooling.

When replacing a processor, order a processor upgrade kit. The kit includes the processor, a heat sink, and a disposable electrostatic discharge (ESD) wrist strap.

To replace the E-3200 processor

1.Turn off the system and disconnect the power cord.

2.Open the case, observing the “Static Electricity Precautions” on page 2.

16 Maintaining and Troubleshooting Your E-3200 System