Error Message

Solutions

 

 

Keyboard clock line

Try a working keyboard.

failure.

Make certain the keyboard is compatible

 

with the system. You may have to change

 

the switch setting to AT.

 

 

Keyboard controller

Try a working keyboard.

failure.

Make certain the keyboard is compatible

 

with the system. You may have to change

 

the switch setting to AT.

 

 

Keyboard controller

Try a working keyboard.

failure.

Make certain the keyboard is compatible

 

with the system. You may have to change

 

the switch setting to AT.

 

 

Keyboard not detected.

See “The keyboard does not work.” on

 

page 61.

 

Turn off the system and check the keyboard

 

cable.

 

 

Keyboard stuck key

Remove any objects that may be resting on

failure.

the keyboard, and then restart the system.

 

Check for sticky keys. Clean the keyboard if

 

necessary.

 

 

Memory errors were

See “Memory errors were detected during

detected while the

system start up.” on page 55.

system powered up.

 

 

 

Memory size error.

Enter Setup utility and save the memory

 

configuration.

 

 

Non-system disk or disk

Eject the diskette and press ENTER.

error.

If the diskette is bootable, check it for

 

errors.

 

 

Not enough memory.

Close all programs that are not currently in

 

use.

 

 

Print queue is full.

Wait until the current print job has

 

completed before sending another print job.

 

If you receive this error often, you need to

 

add memory to the printer.

 

 

Printer is out of paper.

Add paper to the printer.

 

Make certain the printer is online.

 

 

68 Maintaining and Troubleshooting Your E-3200 System