Closing the case
Replace the chassis cover as soon as you finish installing or removing components so that dust and dirt (which could damage the computer) do not collect inside the computer.
To replace the front bezel:
1Lift the front of the chassis and set the lower chassis tabs into the locking holes on the bezel.
2Press the bezel into the chassis until the three upper tabs snap into their locking holes. Two of the three upper tabs latch underneath the locking holes. One tab latches over the top of the chassis.
To replace the chassis cover:
1Place the cover on the computer, making sure the tabs on the front end are inserted underneath the bezel and the rear of the cover is in a raised position.
2Lower the rear of the cover onto the computer chassis until the side latches snap into place.
3Reinstall the thumbscrew or lock that was removed to open the case.
Closing the case | 19 |