640t – Installation and Operating Instructions
Control Panel
A
C
B
D
EG
FH
IK
JL M
Fig. 5-13. Control Panel.
A. Ready Indicator
The Ready Indicator informs the operator that the machine has reached the desired set temp of the Top Main Roller.
B. Temperature Display
The Temperature Display shows the Set Temperature of the laminator.
C. Speed Display
The Speed Display shows the set speed of the laminator.
Temp Section
D. MES (Measure)
Press MES to show the actual Top Main Roller Temperature.
E. Temp Arrow Up
To increase the Top Main Roller temperature, press and hold.
F. Temp Arrow Down
To decrease the Top Main Roller temperature, press and hold.
G. HOT
For the factory preset temperature of the Top Main Roller, press HOT.
H. COLD
For the factory preset temperature of the Top Main Roller, press COLD
Speed Section
I. Speed Arrow Up Symbol
To increase the Roller speed, press and hold.
J. Speed Arrow Down Symbol
To Decrease the Roller speed, press and hold.
K. RUN
Press and release RUN for continuous running.
L. STOP
Press STOP to stop the machine.
M. REV (Reverse)
Press and hold REV to reverse the direction of the rollers. Release REV to stop. When in the reverse mode, the machine will operate at 3 fpm, (0.9mpm)
Page
