Connecting Optional Headset
Each handset can be used with an optional headset for hands free operation.
1.Connect the headset to the headset jack on the side of the handset. The handset receiver and microphone are disabled when the headset is connected.
2.Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to approximately two to three inches from your mouth.
3.Press the TALK button to answer a call or make calls using the headset.
4.To return to normal operation, unplug the headset from the jack.
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved model
1.Make sure the telephone is OFF (not in TALK mode) before you replace the battery.
2.Remove the battery compartment door.
3.Disconnect the cord attached to the battery pack and remove the battery pack from the handset.
4.Insert the new battery pack and connect the cord to the jack inside the battery compartment.
5.Put the battery compartment door back on.
6.Place handset in the base or handset charge cradle to charge. Allow the handset battery to properly charge (for 16 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised.
NOTE: The RBRC seal on the battery used in your Thomson Inc. product indicates that we are participating in a program to collect and recycle the rechargeable battery (or batteries).
For more information go to the RBRC web site at www.rbrc.org or call
56
