INCOMPLETE DATA | Caller information is interrupted during transmission or the |
| phone line is excessively noisy. |
LINE IN USE | Displays on handset while the line is in use. |
LONG DISTANCE | Indicates CID record is from a long distance call. |
LOW BATTERY | Indicates the battery needs to be charged. |
NEW | Indicates call or calls have not been reviewed. |
NEW CALL XX | XX represents the number of new CID records not reviewed. |
NO CALLS | Indicates there are no CID records in memory. |
NO DATA | No Caller ID information was received. |
OUT OF RANGE | May indicate handset is too far away from the base or that |
| the power has been interrupted. Move closer and check |
| connections. |
PAGING or | Someone pressed the PAGE button on the base or INT |
PAGING FROM | button on the handset |
PLEASE REGISTER | Indicates the handset needs to be registered before use. |
REPEAT | Repeat call message. Indicates that a new call from the same |
| number was received more than once. |
SEARCHING | Indicates handset is searching for the base. |
SPEAKER | Indicates the handset is in speakerphone mode. |
UNKNOWN CALLER/ | The incoming call is from an area not serviced by Caller ID or |
NAME/NUMBER | the information was not sent. |
Handset Sound Signals
Signal | Meaning |
A long warbling tone (with ringer on) | Signals an incoming call |
Three short beeps | Page signal |
One long beep | Confirmation tone for the |
| completion of a function |
One short beep (during room monitoring mode) | Ring alert tone |
One short beep (every 7 seconds) | Low battery warning |
58
