NOTE:
1.Once the registration procedure is complete, the handset will automatically be allocated the next available handset number.
2.Once the Page button is pressed and held for more than 10 seconds on a base station, the base stays in registration mode for approx. 2 minutes. While the handset searches for an available base station, the screen displays
SEARCHING.
Deregister Handset
WARNING: It is not recommended that a handset be deregistered unless absolutely necessary because once a handset is deregistered, that handset’s telephone features cannot be used until the handset is
1. | Use the | or | button to scroll to Deregister HS through | ||
| the submenu Registration. |
| |||
2. | Press the OK (SKL) button. |
| |||
3. | If necessary, use the | or | button to select the handset | ||
and press OK (SKL) button. “Deregister HS?” shows in the display.
4.Press the OK (SKL) button to confirm.
Select Base
1. Use the or button to scroll to Select Base through the submenu HS Settings.
2.Press the OK (SKL) button.
3.Use the 
or 
button to select a specific base.
4.Press the OK (SKL) button to confirm the selection.
Tones ON/OFF
1. | Use the | or | button to scroll to Tones ON/OFF through |
| the submenu HS Settings. | ||
2. | Press the OK (SKL) button. | ||
3. | Use the | or | button to choose Key tone, Battery Low |
and Out of Range.
4.Press the OK (SKL) button.
5.Use the 
or 
button to select OFF or ON.
6.Press the OK (SKL) button to confirm the selection.
7.Repeat steps
20
