GE 28225 manual Intercom Operation, Paging the Handset, Key Lock, Making Intercom Calls

Paging the Handset

If a handset has been misplaced, it is possible to call all the handsets. The handset will ring at full volume regardless of any programmed pre-set.

1.Press the page button briefly on the base station.

To stop the page call:

1. Quickly press and release the /flash, /end, or
button on the handset or page button on the base.
Key Lock
Press the and hold the	button for 2 seconds to activate or
de-activate the key lock.

When handset keys are locked, you are still able to receive incoming calls by pressing the /flash button.

Intercom Operation

Making Intercom Calls

If more than one handset is registered on the base station, it is possible to make intercom calls between the handsets.

1. Press the INT (SKR) button.

2. Use the or button to select the required handset (Handset 1 or Handset 2).

3.Press the OK (SKL) button to initiate the conversation.

4.Press the/end button to end the call.

NOTE: During the conversation, you can use

or button to adjust the speaking volume (5 levels).

Receiving Intercom Calls

When an intercom call arrives, the handset rings and displays the caller’s handset number. flashes in the handset display.

1.Press the /flash button to establish the connection.

NOTE: If auto answer is enabled, the line can also be automatically connected after the handset is lifted up from the base.

2.Press the/end button to terminate the call.

29