11
. Plug one end of the telephone line cord into the TEL jack on the back of the base
and the other end into a modular jack.
3. Plug the AC power converter into the electrical outlet and the DC connector into
the jack on the back of the base.
4. Place the handset in the base cradle. The CHARGE indicator turns on, verifying the
battery is charging.
Allow handset to charge for 16 hours prior to rst use. If you do not properly
charge the handset, battery performance is compromised.
CAUTION: Use only the model 5-2711 power adaptor that came
with this unit. Using other power adaptors may damage the unit.
Software Installation
Verify that the USB cable is NOT connected to computer before
starting this installation.
1. Insert the SKYLINK™ -in-1 Phone Utility CD in your personal computer. Select the
install language, and click [Next] to continue.
-OR-
If the following screen does not appear, nd SKYLINK™ Setup and click on icon to
start the SKYLINK™ -in-1 Phone Utility procedure.
. Wait while the program prepares setup. Click [Cancel] ONLY if you wish to stop the
installation.