45
No sound from handset
• Adjust handset volume.
• Check and adjust sound settings in Skype, under "Sound Devices".
You experience static, noise, or fading in and out
• The handset may be out of range of the base. Move closer to the base.
• Make sure base is not plugged into an outlet with another household appliance.
If necessary, relocate the base.
Unit beeps
• Clean charging contacts on cordless handset.
• See solutions for “No dial tone”.
• Replace the battery.
Memory Dialing doesn’t work
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
Unit locks up and there is no communication between the base and cordless handset
• Unplug the USB cable and the AC power adaptor from the wall outlet and the
back of the base. Remove the handset battery. Wait for 30 seconds and plug
the power adaptor back into the base and wall outlet. Reconnect the battery and
charge for 16 hours.
Handset displays "SEARCHING" or "NOT REGISTERED" and cannot link up with the
base when the TALK/CALL BACK button is pressed.
• Handset may be out of range of the base. Move closer to the base.
• Make sure the power adaptor is properly installed.
• Disconnect the handset battery and plug it in again. Place the handset on the
cradle for at least to 3 minutes.
• Disconnect the power adaptor and plug it in again. Then place the handset on
the cradle for at least to 3 minutes.