Motion Sensor (Obtained locally)
The Occupancy Sensor dip switch must be in the up position to use this feature.
When connected, the wall mounted motion sensor will detect motion in the room and automatically cycle the unit between normal operation and energy management operation.
The door and motion sensors work together to automatically cycle the unit between normal operation and energy management operation.
Door Sensor (Obtained locally)
The Occupancy Sensor dip switch must be in the up position to use this feature.
When connected, the door sensor will detect when the door in the room is opened or closed. This feature must be used in conjunction with the motion sensor.
The door and motion sensors work together to automatically cycle the unit between normal and energy management operations.
Central Desk Control
When connected, the unit
Remote Thermostat
The unit will be controlled by a remote thermostat.
IMPORTANT:
The Zoneline thermostat connections provide 24V AC only.
If using a digital/electronic wall thermostat, you must set it to the 24V AC setting. See the Installation Instructions for the wall thermostat.
NOTICE:
Damage to a wall thermostat or to the Zoneline electronics can result from improper connections. Exercise extra attention when connecting blue and black wires. No line voltage connections should be made to any circuit in the thermostat. Isolate all wires in building from line voltage.
GEAppliances.com
24VAC | FANLO | FANHI | REVVAL | COMP | AUXHEAT | COMMON |
Motion |
|
|
|
|
|
|
Sensor |
|
|
|
|
|
|
24VAC | FANLO | FANHI | REVVAL | COMP | AUXHEAT | COMMON |
Door Sensor
24VAC | FANLO | FANHI | REVVAL | COMP | AUXHEAT | COMMON |
Central Desk Control
24VAC | FANLO | FANHI | REVVAL | COMP | AUXHEAT | COMMON |
7
Safety Instructions
Operating Instructions
Care and Cleaning
Troubleshooting Tips Consumer Support