LIST OF FIGURES |
| |
1. | Relocation and remounting of the W and X relays | 5 |
2. | New X and W relay mounting brackets | 5 |
3. | Flux shifter assembly | 6 |
4. | Pattern for flux shifter mounting holes in the side frame | 6 |
5. | Flux shifter assembly mounted to the side frame | 6 |
6. | Location of new hole in the flux shifter base | 7 |
7. | Locations of new holes for mounting the OFLO terminal block | 7 |
8. | Existing trip paddles to be removed | 8 |
9. | Installing the new trip paddle | 8 |
10. | Adjusting the flux shifter | 8 |
11. | Mounting hole drill pattern for the trip unit mounting plate | 9 |
12. | Trip unit mounting plate attached to the breaker front channel | 9 |
13. | Trip unit mounting bracket attached to the mounting plate | 10 |
14. | Actuator bracket attached to the left pole link | 11 |
15. | Drill pattern for actuator bracket mounting holes | 11 |
16. | Existing EC trip devices before removal | 12 |
17. | Removal of EC trip devices | 12 |
18. | Parts provided for CT installation per pole | 13 |
19. | CT post mounted in the breaker back frame | 13 |
20. | CT installation completed.. .................................................................................................................... 13 | |
21. | Phase sensor installation on | 14 |
22. | Attaching the trip unit to the mounting plate | 15 |
23. | Trip unit mounted on the breaker | 15 |
24. | 16 | |
25. | 17 | |
26. | 17 | |
27. | 17 | |
28. | 18 | |
29. | Outline of the neutral sensor for | 19 |
30. | Outline of the neutral sensor for | 20 |
31. | 21 | |
32. | 21 | |
33. | 21 | |
34. | 22 | |
35. | 22 | |
36. | Cabling diagram for ProTrip™ trip units with ground fault on | 25 |
3