GE FGB-M05 manual 3.2.1Change components

Rev. May 2001	GraviMaster-FGB-M05 (S)	Page 21
	Gravimetric Blender

3.2.1Change components

There is a components list available in the controller. The list can be used by the operator to define recipes. The components list stores the name and type of a component and is maximised to 100 components. The operator is free to chose a name for a component. There are only three options namely:

Regrind	Scrap-material
Natural	Basic-material
Additive	Additive-material (e.g. masterbatch)

One component of every type is already present in the list. These components have the name ‘no name’ and can not be deleted from the list.

To add or modify components chose the menu (F1) ‘recipes / edit components’. The next screen will be displayed:

[0]OPERATING AUTO[ ]		[ ]	[ ]
STATN:[0] FGB#00: (No name)		STATUS	OPERATING
MODE: AUTOMATIC
------------------------		[Edit components]
Name	Type
SCR GARDEN CHAIR	REGRIND
ADEG-2RN	NATURAL
ADEG-4RN	NATURAL
ANTISTATIC ALU	ADDITIVE

<ENTER> = edit component <INSERT> = insert component <DELETE> = delete component

F1Menu F2Option F3	F4Clear	F5Start	F6Stop	F7Pauze
F8Cont.