Rev. May 2001

GraviMaster-FGB-M05 (S)

Page 45

 

Gravimetric Blender

 

6.0MAINTENANCE AND REPAIR

Make sure ,when maintenance or repair is carried out, the power is shut off (by pulling the plugs out) and the air pressure (by disconnecting the air pressure).

6.1Maintenance

Everything is set right and tested in the factory, adjustments should only be carried out if a part of the machine is not working correctly

Air pressure: Set air pressure to about 6 bar for best accuracy. However, lower pressure will work. If your plant air fluctuates, set the regulator to the low end so that the dispense valves always see a consistent pressure.

Level sensor: The sensor should protrude into the mixer chamber about 1 cm past the inside surface of the stainless mounting plate. If it protrudes too far, it will sense the mixer blades. If it does not protrude far enough, it will sense the mounting plate itself.

Adjusting sensor sensitivity:

At the end of the sensor is a small screw, with this the sensitivity is adjustable.

step1:

fill the mixer chamber until the sensor is covered.

step2:

turn screw counter-clockwise until the led goes on (if the led already

 

is on, then turn clockwise until led goes off and proceed with step 4).

step3:

turn screw clockwise until led goes off.

step4:

turn screw another 3/4 turn clockwise.

step5:

Empty the mixer chamber and check to be sure the sensor does not

 

react on the mixer blades.

Weighbin dump valve:The weighbin dump valve should open and close smoothly. Two airflow regulators are attached on the cylinder. This can be adjusted by the screw that is on top of it.

Page 45 Page 47
Page 46
Image 46
GE FGB-M05 manual Maintenance, Adjusting sensor sensitivity
Page 45 Page 47

FGB-M05 specifications

The GE FGB-M05 is a cutting-edge gas turbine designed for a variety of industrial applications, showcasing remarkable efficiency and advanced technology. As a part of General Electric's extensive portfolio of power generation solutions, the FGB-M05 stands out for its versatility and reliability.

One of the main features of the FGB-M05 is its modular design, which allows for easy maintenance and adaptability to different operating conditions. This modularity helps reduce downtime and enhances overall operational efficiency. The gas turbine is engineered to optimize performance across a wide range of workloads, making it suitable for both base load and peak shaving applications.

Incorporating advanced aerodynamics, the FGB-M05 leverages high-efficiency compressor stages that significantly improve its operational performance. The turbine features state-of-the-art cooling technologies that enhance combustion efficiency while ensuring longer equipment life. This is particularly important in high-temperature applications, where maintaining material integrity is crucial.

The FGB-M05 is equipped with sophisticated control systems that enable real-time monitoring and optimization of its operational parameters. These control systems enhance the turbine’s capability to respond dynamically to changing load demands, ensuring that it operates at peak efficiency at all times. Additionally, the turbine supports a range of fuels, including natural gas and biogas, making it a versatile choice for various power generation needs.

Furthermore, the FGB-M05 incorporates advanced emissions control technologies, reducing its environmental impact. It is designed to meet stringent emissions regulations, boasting low NOx and CO emissions levels, which are essential for compliance in many regions.

The GE FGB-M05 gas turbine is also noted for its compact footprint, making it an ideal solution for locations where space is limited. Its combination of high performance, flexibility, and reduced emissions makes it a preferred choice for energy providers looking to invest in sustainable and efficient power generation technologies.

In summary, the GE FGB-M05 gas turbine stands as a testament to modern engineering, combining innovative features, robust technology, and a commitment to environmental responsibility. Whether for industrial applications, peaking plants, or renewable integration, the FGB-M05 delivers reliability and excellence in performance.
Top Page Image Contents