Rev. May 2001 | Page 23 | |
| Gravimetric Blender |
|
If the character W has been found the ? key is pressed.
Name | Type |
<W> ? | [NATURAL] |
|
|
Step: Repeat the same procedure for the character H, I, T and E. When the whole name is given press <ENTER>. Now the name ‘WHITE” is stored.
NameType
?WHITE? [NATURAL]
Step: Press the ? key again to select the
Name | Type |
[WHITE] | NATURAL ? |
|
|
Step: Press <ENTER> to activate the field.
Name | Type |
[WHITE] | [NATURAL ] |
| REGRIND |
| NATURAL |
| ADDITIVE |
|
|
Step: Select ADDITIVE by using the arrow keys and confirm by pressing <ENTER>.
Name | Type |
[WHITE] | ?ADDITIVE ? |
|
|
Step: To confirm the new component press the arrow key ? or use the <ESC> key.
Now the “ADDITIVE” component “WHITE” is added to the list. The maximum number of components is 100.