giBQuestions?

~- Use This Problem Solver

~

PROBLEM POSSIBLE CAUSE AND REMEDY
CONTROL PANEL STARTpad not touched.
ON, YET OVEN WILL Door not securely closed.
N(YI’OPERATE Another function was touched. Touch CLEAR/OFF to cancel.
Numbers not entered after touching Time Cook.
Finished temperature not entered after touching Temp Cook.
CLEAR/OFF pad touched accidentally.
No code number entered after touching Auto Cook, Auto Roast or Auto Defrost.
FOODS OVERCOOKED Not enough time set when using Time Cook function because starting temperatures
OR UNDERCOOKED of foods varied widely,
Varying density andamount of foods will sometimes require more cooking time.
Dish in Auto Cook not covered as directed.
Humidity or moisture in oven will lessen the cooking time in the Auto Cook
function. Make sure inside of oven and outside of containers are dry.
Some standing time is recommended for certain vegetables cooked with the Auto
Cook setting.
Probe not inserted properly into meat or dish. Check cookbook or Auto Roast section
of this book.
Incorrect power level entered.
Dish not rotated, turned or stirred as called for in recipe.
.Too many dishes in oven at same time.
Food not thoroughly defrosted.
Improper use of coverings. Check cookbook and this book for instructions.
MICROWAVE OVEN Microwave oven fan is used during self-cleaning of conventional oven to keep
FAN COMES ON components cool. Microwavepower is not on.
WHEN OVEN ISOFF
“PROBE” APPEARS Probe not inserted properly intooven receptacle or food.
ON DISPLAY Probe not used, although Auto Roast or Temp Cook pads have been touched.
“ERROR’ APPEARS When using the Temp Cook function, you have entered atemperature of less than
ON DISPLAY 80”F. or more than 199”F.
Door was opened during “AUTO” cycle of Auto Cook function. Close door and
touch START pad.

All These Things Are Normal on YourMicrowave Oven:

Steamorvaporescapingfrom Dull. thumping sound while Some TV-Radio interference
around the door. oven is operating. might be noticed while using your
Light reflection around door or Dimming oven light and change microwave oven. It’s similar to the
outer case. in blower sound may occur while interference caused by other small
operating at power levels other appliances and does not indicate a
than high. problem with your oven.
44