Instructions

Care and cleaning of the cooktop.

Burner Grates, Vent Grille and Gasket

and Cleaning Operating Instructions Safety

Appearance may vary.

The grate legs have four rubber feet. To order replacement rubber grate feet, please call our toll-free number:

National

Parts Center . . . . . . 800.626.2002

Rubber Grate Feet #WB02T10101

Lift off when cool. Grates, grille and gasket should be washed regularly and, of course, after spillovers.

To clean, wash them in hot, soapy water and rinse with clean water.

Discoloration on the grates may also be removed by using the provided cooktop cleaning cream. Apply a drop or two on a damp cloth and rub across the discolored area. Rinse and dry. After cleaning, replace the burner grates and make sure they are positioned securely over the burners.

To remove burned-on food, use a soap- filled scouring pad.

Although they are durable, the grates will gradually lose their shine, regardless of the best care you can give them. This is due to their continual exposure to high temperatures. You will notice this sooner with lighter color grates.

Do not operate a burner for an extended period of time without cookware on the burner grate. The finish on the grate may chip without cookware to absorb the heat.

Replacement

Before replacing the vent grille, make sure the grille gasket is properly installed around the downdraft vent opening, with the word “FRONT” toward the knobs. Replace the vent grille carefully over the gasket.

When replacing the grates, make sure the curved sides of the grates are toward the center.

Grille

Vent Grille Gasket

Vent Filter

Curved Side

of Grate

NOTE: Do not clean the grates, grille or grille gasket in a self-cleaning oven.

The grates, grille and grille gasket may be cleaned in a dishwasher.

Troubleshooting Tips Care

To order replacement filters, please call our toll-free number:

National

Parts Center . . . . . . 800.626.2002

Filter . . . . . . . . . . . . #WB02X10651

Vent Filter and Chamber

Remove the vent grille and vent grille gasket. The filter is held in place at an angle with a hold bump. Lift the filter up and out of the vent opening diagonally.

To clean the filter, swish it in hot, soapy water. Rinse well with clean water and dry thoroughly.

Do not operate the vent without the filter in place.

Consumer Support

Grille

Vent Grille

Gasket

Vent Filter

Vent

Chamber

Remove and replace the filter diagonally through the vent opening.

12

When replacing the filter, make sure it rests, at an angle, on the supports in the vent opening.

To clean the vent chamber, use hot, soapy water. Rinse with clean water and dry thoroughly. Do not use abrasive cleaners; they will damage the finish.

Replacement

Replace the filter after it is cleaned and dry. Replace the vent grille gasket by forming it around the vent opening and make sure the word “FRONT” is toward the knobs. Replace the grille.

Page 12
Image 12
GE PGP989 manual Cleaning Operating Instructions Safety, Burner Grates, Vent Grille and Gasket, Troubleshooting Tips Care