GE PGP989 manual Installing The Cooktop, Installation Instructions, 8INSTALLING THE COOKTOP

Installation Instructions

INSTALLING THE COOKTOP

8INSTALLING THE COOKTOP

CAUTION:

DO NOT LIFT FROM

VENT OPENING.

Lift the cooktop by the glass side edges as shown.

NOTE: Do not use the glass top vent opening to lift or move the cooktop into position.

Lower the cooktop into the countertop opening, guiding it into position. Glass is fragile—do not allow it to drop onto the countertop. Support from the underside and lower slowly.

Carefully remove your fingers one corner at a time to lower the cooktop into position.

NOTE: Do not use Silicone RTV or caulk to bond cooktop glass to countertop.

9CHECKING FOR FLATNESS

Inspect the cooktop glass for rocking or uneven gap on all four sides at the countertop surface. Do not attempt to force the glass to meet the countertop.

Check for uneven gaps

10INSTALLING THE OPTIONAL INSTALLATION BRACKETS

NOTE: Check for glass flatness in Step 9 before installing optional installation brackets.

	Optional installation
	bracket and thumb
	screw (not included)
Cooktop	Countertop
Screws supplied with cooktop	Thumb screw

To order optional installation brackets/thumb screws, call the National Parts Center at 800.626.2002. Order two of each part: WB02X11331 Bracket

WB01X10353 Screw

To install optional installation brackets: Remove 2 screws on both sides under cooktop.

Align optional installation bracket under cooktop and reinstall screws through the slot in the bracket. Do this on both sides of the cooktop.

Thread the thumb screw through the hole in the bracket and tighten to secure the cooktop to the countertop. Repeat on the other side.

IMPORTANT: Turn thumb screw until it touches the bottom of the countertop. Do not overtighten.

25