Special Features

Wall Oven

Special features of your oven control

Your new touch pad control has additional features that you may choose to use.

They remain in the control’s memory until the steps are repeated. When the display shows your choice, press the START pad. The special features will remain in memory after a power

failure, except for the Sabbath feature, which will have to be reset.

The special feature modes can only be activated while the display is showing the time of day clock.

The following are the features and how you may activate them.

Tones at the end of a timed cycle

Tone volume

At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is pressed. This continuous 6-second beep may be canceled. To cancel the

6-second beep:

1Press the BAKE and BROIL HIGH/LOW pads (on double oven models, use the upper oven controls) at the same time for 3 seconds until the display shows “SF.”

2Press the TIMER ON/OFF pad. The display shows “CON BEEP” (continuous beep). Press the TIMER ON/OFF pad again. The display shows “BEEP.” (This cancels the one beep every 6 seconds.)

3Press the START pad.

NOTE: On double oven models, this cancels the end-of-cycle tone for both ovens.

This feature allows you to adjust the tone volumes to a more acceptable volume. There are three possible volume levels.

1Press the BAKE and BROIL HIGH/LOW pads (on double oven models, use the upper oven controls) at the same time for 3 seconds, until the display shows “SF.”

2Press the oven light on/off pad. The display will show “2 BEEP.” This is the middle volume level.

Press the oven light on/off pad again. The display will show “3 BEEP.” This is the loudest volume level.

Press the oven light on/off pad again. The display will show “1 BEEP.” This is the quietest volume level.

For each time the level is changed, a tone will sound to provide an indication of the volume level.

3Press the START pad to activate the level shown.

NOTE: On double oven models, this activates this special feature for both ovens.

10

Page 9 Page 11
Page 10
Image 10
GE ZEK958, ZEK938 owner manual Special features of your oven control, Tones at the end of a timed cycle Tone volume
Page 9 Page 11

ZEK938, ZEK958 specifications

The GE ZEK958 and ZEK938 are advanced digital relays designed for protecting and monitoring electrical power systems. These devices are part of GE's broader line of protective relays, which harness cutting-edge technology to ensure reliable performance and robust protection for critical electrical assets.

One of the main features of the GE ZEK958 and ZEK938 is their comprehensive protection capabilities. Both models offer multifunctional protection, including overcurrent, earth fault, and distance protection. They are adept at detecting and isolating potential faults, which can prevent equipment damage and enhance system reliability.

The ZEK958 model is particularly noted for its advanced communication protocols. It supports multiple communication standards, including IEC 61850, DNP3, and Modbus, allowing for seamless integration into modern substation automation systems. This connectivity capability ensures that real-time data can be shared across various systems, facilitating enhanced monitoring and control.

Conversely, the GE ZEK938 is designed for applications that require high-speed tripping and resilience in harsh environments. It caters to the needs of utilities and industries where rapid fault detection is crucial. The ZEK938 features robust housing and is rated for demanding conditions, ensuring consistent performance even in challenging environments.

Both models feature intuitive user interfaces that simplify setup and operation. They come equipped with large displays and user-friendly navigation, allowing operators to configure settings easily and access critical information without extensive training. Additionally, advanced diagnostic capabilities provide detailed fault records and event logs, enabling effective troubleshooting and maintenance.

In terms of technology, both the ZEK958 and ZEK938 utilize digital signal processing to offer superior precision and reliability. This technology helps to eliminate noise and enhance the accuracy of measurement, a critical aspect in power system protection. Furthermore, they incorporate sophisticated algorithms to differentiate between various types of faults, ensuring that the right corrective action is taken swiftly.

In summary, the GE ZEK958 and ZEK938 digital relays stand out for their robust protection features, versatile communication capabilities, and resilience in challenging conditions. They are engineered for modern electrical systems, combining advanced technology with user-friendly design to meet the demands of utility and industrial applications. With these relays, operators can achieve enhanced reliability, improved efficiency, and greater control over their electrical assets.
Top Page Image Contents