Using the Self-Cleaning Oven

Wall Oven

Before a clean cycle

The oven door must be closed and all controls must be set correctly for the cycle to work properly.

We recommend venting your kitchen with an open window or using a ventilation fan or hood during the first self-clean cycle.

Remove the broiler pan, broiler grid, probe, all cookware and any aluminum foil from the oven.

Gray porcelain-coated oven racks (including the offset rack) may remain in the oven during the self-cleaning cycle without being damaged. The convection roasting rack and nickel-plated oven racks (including the offset rack) may remain in the oven during the self-cleaning cycle, but they will darken and become hard to slide.

Do not use abrasives or oven cleaners. Clean the top, sides and outside of the oven door with soap and water.

Make sure the oven light bulb cover (on some models) is in place and the oven light is off.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any oven. Move birds to another well-ventilated room.

Wipe up heavy soil on the oven bottom.

(Appearance may vary.)

On double oven models, you can set a clean cycle in both ovens at the same time. The last oven set will automatically delay its start until the end of the first oven’s clean cycle.

On double oven models, you can use timed baking in one oven and self-clean the other at the same time.

How to set the oven for cleaning

1Press the SELF CLEAN STD/LOW pad once for a 4-hour clean time or twice for a 3-hour clean time.

A 3-hour self-clean time is recommended for use when cleaning small, contained spills. A self-clean time of 4 hours or longer is recommended for a dirtier oven.

2If a time other than 4 hours or 3 hours is needed, use the number pads and enter the desired clean time.

You can change the clean time to any time between 3 hours and 5 hours, depending on how dirty your oven is.

3Press the START pad.

The door locks automatically. The display will show the clean time remaining. It will

not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED light goes off.

When the LOCKED light goes off, you will be able to open the door.

•The word “LOCK” will flash and the oven control will signal if you set the clean cycle and forget to close the oven door.

•To stop a clean cycle, press the CLEAR/OFF pad. When the LOCKED light goes off indicating the oven has cooled below the locking temperature, you will be able to open the door.

35

Page 34 Page 36
Page 35
Image 35
GE ZEK938, ZEK958 owner manual Before a clean cycle, How to set the oven for cleaning
Page 34 Page 36

ZEK938, ZEK958 specifications

The GE ZEK958 and ZEK938 are advanced digital relays designed for protecting and monitoring electrical power systems. These devices are part of GE's broader line of protective relays, which harness cutting-edge technology to ensure reliable performance and robust protection for critical electrical assets.

One of the main features of the GE ZEK958 and ZEK938 is their comprehensive protection capabilities. Both models offer multifunctional protection, including overcurrent, earth fault, and distance protection. They are adept at detecting and isolating potential faults, which can prevent equipment damage and enhance system reliability.

The ZEK958 model is particularly noted for its advanced communication protocols. It supports multiple communication standards, including IEC 61850, DNP3, and Modbus, allowing for seamless integration into modern substation automation systems. This connectivity capability ensures that real-time data can be shared across various systems, facilitating enhanced monitoring and control.

Conversely, the GE ZEK938 is designed for applications that require high-speed tripping and resilience in harsh environments. It caters to the needs of utilities and industries where rapid fault detection is crucial. The ZEK938 features robust housing and is rated for demanding conditions, ensuring consistent performance even in challenging environments.

Both models feature intuitive user interfaces that simplify setup and operation. They come equipped with large displays and user-friendly navigation, allowing operators to configure settings easily and access critical information without extensive training. Additionally, advanced diagnostic capabilities provide detailed fault records and event logs, enabling effective troubleshooting and maintenance.

In terms of technology, both the ZEK958 and ZEK938 utilize digital signal processing to offer superior precision and reliability. This technology helps to eliminate noise and enhance the accuracy of measurement, a critical aspect in power system protection. Furthermore, they incorporate sophisticated algorithms to differentiate between various types of faults, ensuring that the right corrective action is taken swiftly.

In summary, the GE ZEK958 and ZEK938 digital relays stand out for their robust protection features, versatile communication capabilities, and resilience in challenging conditions. They are engineered for modern electrical systems, combining advanced technology with user-friendly design to meet the demands of utility and industrial applications. With these relays, operators can achieve enhanced reliability, improved efficiency, and greater control over their electrical assets.
Top Page Image Contents