GE ZEK958, ZEK938 Oven light bulbs, Probe, Care and Cleaning, Wall Oven, To remove, To replace

Models: ZEK938 ZEK958

1 48
Download 48 pages 10.08 Kb
Page 40
Image 40
Oven light bulbs

Care and Cleaning

Wall Oven

Oven light bulbs

NOTE: The glass cover should be removed only when cold. Wearing latex gloves may offer a better grip.

CAUTION: Before replacing the bulb, disconnect electrical power to the oven at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

For your safety, do not touch a hot bulb with bare hands or a damp cloth.

To remove:

1Turn the glass cover counterclockwise 1/4 turn until the tabs of the glass cover clear the grooves of the socket.

2Using gloves or a dry cloth, remove the bulb by pulling it straight out.

To replace:

1Use a new 130-volt Halogen bulb, not to exceed 50 watts.

2Using gloves or a dry cloth, remove the bulb from its packaging. Do not touch the bulb with bare fingers.

3Push the bulb straight into the receptacle all the way.

4Place the tabs of the glass cover into the grooves of the socket. Turn the glass cover clockwise 1/4 turn.

For improved lighting inside the oven, clean the glass cover frequently using a wet cloth. This should be done when the oven is completely cool.

5Reconnect electrical power to the oven.

ReceptacleSocket

Bulb

Tab

Glass cover

Receptacle

Use gloves or cloth

Probe

The temperature probe may be cleaned with soap and water or a soap-filled scouring pad. Cool the temperature probe before cleaning.

Scour stubborn spots with a soap-filled scouring pad, rinse and dry.

Do not immerse the temperature probe in water.

Do not store the temperature probe in the oven.

40

Page 40
Image 40
GE ZEK958, ZEK938 owner manual Oven light bulbs, Probe, Care and Cleaning, Wall Oven, To remove, To replace