Installation Instructions
4PREPARE THE HOOD
•Place the hood on a padded surface.
•Position the motor housing at the back of the hood. Electrical connectors should face the front, with rear mounting hooks at the back.
•Slip the bottom flange of the motor housing into the side slots at the top rear opening.
Rear mounting
hooks
Rear view
Engage flange on motor
housing into slots
•Carefully lay the hood on its back.
•Fasten the hood to the motor housing from the bottom, using 6 screws.
Front side
Bottom view
Rear side
•Join two cable connectors at the front of the hood.
To Lights
To
Control
Panel
11