Installation Preparation
TOOLS AND MATERIALS REQUIRED (NOT SUPPLIED)
Tape measure
Knife
Spirit level
Wire cutter/stripper
Wire nuts
Electric drill with 5/16″ and 3/8″ bits Phillips and flat blade screwdrivers
Hammer
Pliers
Safety glasses
Duct tape
Tape to mount template
Gloves to protect against sharp edges
120V 60Hz. 15 or 20 Amp, 2 wire with ground Properly grounded branch circuit
Strain relief for junction cover
8″ round metal duct, length to suit installation
Saw, jig saw or reciprocating saw
Strain relief
Wire nuts
Spirit level
Electric drill with 5/16” and 3/8” Bits
Safety glasses
12” long Phillips head screwdriver
Saw, jig saw or
Masking tape reciprocating saw
Gloves
Knife
Wire
cutter/stripper
Hammer
Flat blade
screwdriver
8″ round metal duct,
length to suit
installation
REMOVE THE PACKAGING
CAUTION: LIFT THE HOOD OUT OF THE BOX BY THE CENTER METAL PORTION. DO NOT LIFT BY THE GLASS SIDES.
PRUDENCE : LEVEZ LA HOTTE À L’EXTÉRIEUR DE LA BOÎTE PAR LA PORTION MÉTAL CENTRAL. NE LEVEZ PAS PAR LES CÔTÉS DE VERRE.
CAUTION: Wear gloves to protect against sharp edges.
PRUDENCE : Portez des gants pour éviter les blessures causées par les tranchants.
•Grasp the hood by the metal insert in the center and lift straight up and out of the box.
•Remove and properly discard the plastic wrapping.
•Remove parts box, duct covers and other packaging.
6
