![Design Information](/images/new-backgrounds/66355/663557x1.webp)
Design Information
CONTENTS
Design Information |
|
| ||
Product Dimensions and Clearances | 3 | Ductwork, Wiring Locations | 15 | |
Installation Options | 3 | |||
Step 1, Install Framing for Hood Support | 15 | |||
Installation Preparation |
| |||
| Step 2, Install Mounting Bracket | 16 | ||
Advance Planning, Ductwork, Framing | 4 | Step 3, Install Duct Bracket | 16 | |
Power Supply | 4 | Step 4, Prepare the Hood | 17 | |
Duct Fittings | 5 | Step 5, Mount the Hood | 17 | |
Tools and Materials Required | 6 | Step 6, Level the Hood | 17 | |
Remove the Packaging | 6 | Step 7, Size and Cut Duct Piece | 18 | |
Determine Installation Height | 7 | Step 8, Connect Electrical | 18 | |
Wall Mount Installation Heights | 7 | Step 9, Install Duct Covers | 19 | |
Check Installation Hardware | 8 | Step 10, Install Filters | 19 | |
| Step 11, Finalize Installation | 19 | ||
Step 1, Install Framing for Hood Support | 9 |
|
| |
Step 2, Install Mounting Bracket | 10 |
|
| |
Step 3, Install Duct Bracket | 10 |
|
| |
Step 4, Prepare the Hood | 11 |
|
| |
Step 5, Mount the Hood | 12 |
|
| |
Step 6, Level the Hood | 12 |
|
| |
Step 7, Connect Ductwork | 12 |
|
| |
Step 8, Connect Electrical | 13 |
|
| |
Step 9, Install Duct Covers | 14 |
|
| |
Step 10, Install Filters | 14 |
|
| |
Step 11, Finalize Installation | 14 |
|
|
PRODUCT DIMENSIONS AND CLEARANCES
*Height to Ceiling
INSTALLATION OPTIONS
20 7/16”
3 1/4”
35 7/8”
24” Min. 30” Max.
*The Supplied Duct Cover Fits 8′ to 9′ 5″ Ceiling Heights. For 9′ 6″ to 10′ 5″ ceilings, order ZX90010.
The vent hood must be installed 24″ min., and
30″ max. above the cooking surface. The hood installation height above the cooking surface depends upon ceiling height.
The telescopic duct cover conceals the ductwork running from the top of the hood to the ceiling. The supplied duct cover is sized to reach 8′ to 9′ 5″ ceiling heights.
The ZX90010 accessory is available for ceiling heights of 9′ 6″ to 10′ 5″.
NOTE: Installation height should be measured from the cooking surface to the outer glass sides.
This hood may be installed onto a wall and vented to the outdoors, or it can be installed for recirculating operation. All necessary parts for recirculating operation are supplied with the hood. No kits required.
This hood can be installed over any Monogram electric cooktop or gas cooktop. It cannot be installed over a Monogram Professional cooktop or range.
3