RS-232 SERIAL CONTROL
#RSTIP Function
The #RSTIP function sets the IP configuration to the default settings.
Syntax:
#RSTIP
Parameters:
None
Notes:
A reboot is required after restoring the default IP settings.
#SIPADD Function
The #SIPADD function specifies a new IP address.
Syntax:
#SIPADD param1 param2 param3 param4
Parameters: |
|
|
param1 | IP address | [0 - 255] |
param2 | IP address | [0 - 255] |
param3 | IP address | [0 - 255] |
param4 | IP address | [0 - 255] |
Notes:
A reboot is required after the new IP address is set.
23
