Gefen GEF-DVIKVM-848DL user manual Manage Edid Set Input to Default Edid

IP CONTROL

Manage EDID - Set Input to Default EDID

Pressing the SET INPUT TO DEFAULT EDID button will display additional options. The following page will open.

On this page, local memory locations can be selected to receive the built-in EDID stored in the 8x8 DVI Matrix. To set an input’s local memory location to the default EDID follow the steps below.

1.Select any number of inputs by clicking on the desired checkboxes.

2.Click on the Set Default EDID button to update the change(s).

Note: After this command is complete the Web Interface will return to the VIEW MATRIX STATUS page.

This page will automatically refresh every minute. However, the REFRESH button can be pressed at any time to return the current status of the Matrix.

33