Manuals / Genie / Household Appliance / Garage Door Opener

Genie 1024 Safety Information, Moving Door, Electrical Shock, High Spring Tension, Effect, Hazard

Models: 1024

1 28

Download 28 pages 45.26 Kb

Page 2

SAFETY INFORMATION

2

SAFETY INFORMATION

OVERVIEW OF

POTENTIAL HAZARDS

Garage doors are large, heavy objects that move with the help of springs under high tension and electric motors. Since moving objects, springs under tension, and electric motors can cause injuries, your safety and the safety of others depend on the owner or user of this system to read, understand and implement the information in this manual. If you have questions or do not understand the information presented,contact The Genie Company or an authorized Genie Dealer.

In this section and those that follow, the words DANGER, WARNING, and CAUTION are used to emphasize important safety information.

The word:

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates an potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION indicates an potentially hazardous situation which, if not avoided, may result in injury or property damage.

The word NOTE is used to indicate important steps to be followed, important considerations, or location of parts.

	POTENTIAL	EFFECT	PREVENTION
	HAZARD	EFFECT	PREVENTION
	HAZARD
		WARNING:	Keep people clear of opening while door is moving.
		WARNING:
		Can Cause	Do NOT allow children to play with the door operator.
		Serious Injury	Do NOT operate a door that jams or one that has a broken spring.
		or Death
		or Death

MOVING DOOR

		Turn OFF power before removing operator cover.
	WARNING:	When replacing cover, make sure wires are not pinched or near
	Can Cause
	Can Cause	moving parts.
	Serious Injury	moving parts.
	Serious Injury
	or Death	Operator must be properly grounded.

ELECTRICAL

SHOCK

		Do NOT try to remove, repair or adjust springs or anything to which
	WARNING:	door spring parts are fastened, such as, wood blocks, steel brackets,
	Can Cause	cables or other like items.
	Serious Injury	Repairs and adjustments must be made by a trained professional service
	or Death
	or Death	technician using proper tools and instructions.
		technician using proper tools and instructions.

HIGH

SPRING

TENSION

PN# 3642036212, 8/09/2007

Image 2

Genie 1024 Safety Information, Moving Door, Electrical Shock, High Spring Tension, Overview Of Potential Hazards, Effect

Contents

Safety Beam System must be installed to close door Homelink and Car2U compatibleIncludes Remote Control Model 1022/1024ELECTRICAL SHOCK SAFETY INFORMATIONMOVING DOOR HIGH SPRING TENSIONSAFETY FEATURES TABLE OF CONTENTSOPERATOR FEATURES Operator MUST be installed with the included Wall ControlNOTE Mounting brackets must be installed within code specifications DO NOT USE ALTERNATE POWER SUPPLIESDO NOT USE AN EXTENSION CORD POWER CORD APPROX. 45 IN TO 120V GROUNDED OUTLET EXTENSION SPRING OR TYPICAL SECTIONAL DOOR INSTALLATIONNOTE This operator is designed for use with SECTIONAL doors only SAFETY BEAMSRECOMMENDED TOOLS PARTS IDENTIFICATION - Not Shown Full SizeDO NOT RETURN TO POINT OF PURCHASE IMPORTANT! - Information needed when callingFASTENERS - Shown Full size See Parts List below for full description Model number - located on packaging1-PIECE RAIL HARDWARE ASSEMBLED VIEW 3-PIECE RAIL HARDWARE ASSEMBLED VIEWRAIL ASSEMBLY Use a clean, flat surface 1 OPERATOR ASSEMBLYIMPORTANT INSTALLATION INSTRUCTIONS WARNING Toreduce the risk of severe injury or deathNOTE For split rail clamps, nuts, and bolts locate Bag 0 from Box POWER HEAD & RAIL ASSEMBLYNOTE For power head and rail assembly locate Bag 1 from Box NOTE Handle carefully! Drive chain can slide out of rail1. Finding header bracket mounting location 2 INSTALLATIONHEADER AND DOOR MOUNTING BRACKETS Fig. 2-1, cUNFINISHED OR OPEN BEAM MOUNTING THE OPERATORANGLE IRON ON FINISHED CEILING Extra framingshort clevis pin & cotter pin INSTALL DOOR ARMSDOOR BRACKET bolts as far2b. Wiring If NOT pre-wired 3 WALL CONTROL INSTALLATION2a. Wiring If pre-wired 1. Wall Control location4. Mounting 3.Securely fasten wiresDo NOT install rear cover yet 3a. Wiring If NOT pre-wired 4 SAFETY BEAM SYSTEM INSTALLATION2. Mounting Safety Beam Source Red LED and Sensor Green LED as you go Fig. 4-6 on next page5. Attach Safety Beam wire to power head wire terminal 3b. Wiring pre-wired4. Split and strip ends of sensor wires Fig 6 5 4 3 2WITH POWER SUPPLIED 5 CONNECTING TO POWERWITH PERMANENT WIRING WITH GROUNDED PLUGCLOSE TRAVEL LIMIT 6 DOOR LIMITSENGAGE CHAIN TO CARRIAGE OPEN TRAVEL LIMITERASE - OPEN/CLOSE TRAVEL LIMIT CARRIAGE LOCKUP/DOWN FORCE CONTACT REVERSE TESTLOST OR STOLEN REMOTE 7 PROGRAMMING REMOTE CONTROLSFCC and IC CERTIFIED NOTE For remote control locate Box2. Visor clip 9 LIGHT BULB/LENS INSTALLATION1. Battery replacement NOTE For lens cover locate Box3. Safety Beam System 10 MAINTENANCEROUTINE MONTHLY MAINTENANCE CONTACT A TRAINED PROFESSIONAL SERVICE TECHNICIANCORDON DE SECTEUR CABLE ELÉCTRICO POWER CORDCIRCUIT WIRING DIAGRAM Remove power from operator prior to removing coverCheck power source TROUBLESHOOTING GUIDE - OPERATIONPROBLEM If not, check fuse or circuit breaker If power is OKSolution TROUBLESHOOTING GUIDE - POWER HEAD LEDPossible Problem Power head LEDTRANSMITTER COMPLIANCE STATEMENT PN# 3642036212, 8/09/2007Date Purchased MO / D / YR Serial Number WK / YR / PI The Genie Company Professional Access Systems LIMITED WARRANTYBE AVAILABLE IF YOU EVER NEED TO CALL US Operator Model Remote Control Model Store Purchased Store Address