Goodman Mfg Goodman 90%-95% Gas Furnace Units GMVC95/AMVC95 Continuous Fan Speed Chart

BLOWER PERFORMANCE SPECIFICATIONS

GMVC95/AMVC95 Continuous Fan Speed Chart

Model	Furnace Maxim um	Continuous Fan
	CFM	Speed1,2
GMVC950453BX*	1400	420
AMVC950453BX*
GMVC950704CX*	1760	530
AMVC950704CX*
GMVC950905CX*	2200	660
AMVC950905CX*
GMVC950905DX*	2200	660
AMVC950905DX*
GMVC951155DX*	2200	660
AMVC951155DX*

1 Continuous fan speed is 30% of furnace m axim um CFM

2Three continuous fan s peeds are pos sible with the CTK01AA therm ostat: 30%, 50%, and 70% of furnace m axim um CFM

GCVC9/ACVC9 Continuous Fan Speed Chart

Model	Furnace Maximum	Continuous Fan
	CFM	Speed1,2
GCVC90704CX*	1760	530
ACVC90704CX*
GCVC90905DX*	2200	660
ACVC90905DX*
GCVC91155DX*	2350	705

1Continuous fan speed is 30% of furnace maximum CFM

2Three continuous fan speeds are possible with the CTK01AA thermostat: 30%, 50%, and 70% of furnace maximum CFM.

GCVC95/ACVC95 Continuous Fan Speed Chart

Model	Furnace Maximum	Continuous Fan
	CFM	Speed1,2
GCVC950714CX*	1760	530
ACVC950714CX*
GCVC950915DX*	2200	660
ACVC950915DX*

1Continuous fan speed is 30% of furnace maximum CFM

2Three continuous fan speeds are possible with the CTK01AA thermostat: 30%, 50%, and 70% of furnace maximum CFM.

1.Units are shipped without filter(s). CFM in chart is without filter(s).

2.All furnaces shipped with heating speed set at "B" and cooling speed set at "D". Installer should adjust blower speed as needed. The first task is to determine the proper aiflow for the cooling system.

3.For most cooling applications, about 400 CFM per ton is desirable.

4.The chart is for information only. For satisfactory operation, external static pressure not to exceed value shown on rating plate.

5.Do not operate above 0.5" w.c. ESP in heating mode. Operating between 0.5" w.c. and 0.8" w.c. is tabulated for cooling purposes only.

6.* Motor CFM minimum.

26