Connect the supplied AM and FM antennas.
Plug in and
power on the
unit.
S T E P 5 - C O N N E C T A N T E N N A
A M L o o p A n t e n n a
1.Complete assembly of the supplied AM loop antenna by rotating the base and snapping it into place.
2.Connect the two wires from the AM loop antenna to the AM ANTENNA connec- tor on the back panel. Press down on the thumb lever to insert each wire, and then release to lock the wires in place.
F M A n t e n n a
Connect the supplied FM antenna to the “FM 75Ω COAXIAL” connector on the back panel. If noise or interference occurs, use an external antenna with a 75Ω coaxial cable (not supplied).
S T E P 6 - P O W E R O N T H E
S Y S T E M
1.Connect the power cord to a standard 120VAC/60Hz electrical outlet.
•The red Standby LED will glow on the front panel to indicate that the system is plugged in and in Standby mode.
2.Press the POWER 
button on the front panel or the remote control to power on the unit.
4 |
