Parts
On-Board Stainless Steel Tanks
Tank Assemblies LC0237, LC0238,
LC0254, and LC0255
Right hand tank shown, left hand tank is mirror image.
3 | 304 | 304a |
|
|
2302
306 4
309
301
Assembly LC0237 Shown
307
303 1 |
| 308 4 | ti12451a |
305 1 | 4 |
| |
|
|
1Use glass cloth tape to secure ground strap, thermal switch, and RTD to tank wall before adding heat blanket.
2Secure heat blanket to tank with string laced through eyelets.
3Insulation blanket should cover heat blanket completely. Secure insulation blanket to tank with 2 in. wide velcro strap.
4The RTD sensor assembly (308) should always be connected to side one of the M8 splitter harness (306). Side one is on the female/female end of connector and is marked with a molded imprint of the number “1”. The RTD sensor assembly (305) should always be connected to side two of the M8 splitter harness (306).
312394V | 37 |
