Grizzly g0747, g0748 owner manual Main Specifications Operation Info

Main Specifications:
Operation Info
Spindle Travel	5 in.
Max Distance Spindle to Column	24-3/8 in.
Max Distance Spindle to Table	16-7/8 in.
Longitudinal Table Travel (X-Axis)	29-7/8 in.
Cross Table Travel (Y-Axis)	15-3/4 in.
Vertical Table Travel (Z-Axis)	16 in.
Ram Travel	24 in.
Turret or Column Swivel (Left /Right)	360 deg.
Head Tilt (Left/Right)	90 deg.
Head Tilt (Front/Back)	45 deg.
Drilling Capacity for Cast Iron	1-1/4 in.
Drilling Capacity for Steel	1 in.
End Milling Capacity	1 in.
Face Milling Capacity	3 in.
Table Info
Table Length	50 in.
Table Width	10 in.
Table Thickness	3-5/16 in.
Number of T-Slots	3
T-Slot Size	5/8 in.
T-Slots Centers	2-1/2 in.
X/Y-Axis Travel per Handwheel Revolution	0.200 in.
Z-Axis Travel per Handwheel Revolution	0.100 in.
Spindle Info
Spindle Taper	R-8
Number of Vertical Spindle Speeds	16
Range of Vertical Spindle Speeds	80 – 5440 RPM
Quill Diameter	86 mm
Quill Feed Rates	0.0015, 0.003, 0.006 in./rev.
Drawbar Thread Size	7/16-20
Drawbar Length	23-1/2 in.
Spindle Bearings	Angular Contact Bearings
Construction
Spindle Housing/Quill	Chrome-Plated & Precision-Ground Steel
Table	Precision-Ground Meehanite Cast Iron
Head	Aluminum
Column/Base	Meehanite Cast Iron
Base	Cast Iron
Paint	Enamel
Other Specifications:
Country Of Origin	China
Warranty	1 Year
Approximate Assembly & Setup Time	1 Hour
Serial Number Location	ID Label on Column
ISO 9001 Factory	Yes
CSA Certified	No

-8- Model G0747/G0748 (Mfg. Since 8/12)