Grizzly g0748, g0747 owner manual Table Ways One-Shot Oiler, Headstock Gearing

Table Ways (One-Shot Oiler)

Oil Type	Model T23962 or ISo 68 Equivalent
Oil Amount		One Pull of Pump Handle
Check/Add Frequency		4–8 hrs. of Operation

The one-shot oiler is connected to a series of alu- minum tubes that carry the lubricant to wear points along the table horizontal and vertical ways.

Pull the handle out slowly then release it to send the oil through the tubes (see Figure 53), then move the table through all paths of movement to evenly distribute the lubricant.

Use the sight glass on the side of the oiler to know when to re-fill the reservoir.

Reservoir Cap

Pump

Handle

Sight Glass

Figure 53. One-shot oiler.

Model G0747/G0748 (Mfg. Since 8/12)

Headstock Gearing

Grease Type		NLgi 2 or Equivalent
Grease Amount	Two Pumps of Grease Gun
Check/Add Frequency		40 hrs. of Operation

Add two pumps from a grease gun to the grease fittings that are shown in Figures 54–55.

G0747

Grease Fitting

Figure 54. Model G0747 headstock gearing

grease fitting.

G0748

Grease Fitting

Figure 55. Model G0748 headstock gearing

grease fitting.

-45-