Cleanup
The unpainted surfaces of your machine are coated with a
Be patient and do a thorough job cleaning your machine. The time you spend doing this now will give you a better appreciation for the proper care of your machine's unpainted surfaces.
There are many ways to remove this rust preven- tative, but the following steps work well in a wide variety of situations. Always follow the manufac- turer’s instructions with any cleaning product you use and make sure you work in a
Before cleaning, gather the following:
•Disposable Rags
•Cleaner/degreaser (WD•40 works well)
•Safety glasses & disposable gloves
•Plastic paint scraper (optional)
Basic steps for removing rust preventative:
1.Put on safety glasses.
2.Coat the rust preventative with a liberal amount of cleaner/degreaser, then let it soak for
3.Wipe off the surfaces. If your cleaner/degreas- er is effective, the rust preventative will wipe off easily. If you have a plastic paint scraper, scrape off as much as you can first, then wipe off the rest with the rag.
4.Repeat Steps
Gasoline or products with low flash points can explode or cause fire if used to clean machin- ery. Avoid cleaning with these products.
Many cleaning solvents are toxic if concentrat- ed amounts are inhaled. Only work in a
NOTICE
Avoid
A great product for removing the waxy shipping grease from your machine during clean up.