Controls &

Components

To reduce your risk of serious injury, read this entire manual BEFORE using machine.

Refer to Figures 2–6and the following descrip- tions to become familiar with the basic controls of this lathe.

Control Panel

A

B

 

C

F E D

Figure 2. Control panel.

A.On/Off Switch w/Emergency Stop Button: When pressed, cuts power to motor and control panel. To reset, press in side tab, lift switch cover, and press On button.

B.Spindle Speed RPM Display: Shows a digi- tal readout of the spindle speed.

C.Power Light: Illuminates when machine is connected to power source, Emergency Stop Button is reset, and On button is pressed.

D.Spindle Switch: Starts, stops, and reverses spindle rotation.

E.Fuse: Protects control panel in case of an electrical overload.

F.Variable Speed Dial: Controls the variable speed of the spindle.

Model G0765 (Mfd. Since 12/13)

Carriage

G

H

L

K

 

I

 

J

 

 

 

Figure 3. Carriage controls.

G.4-Way Tool Post: Holds up to four cutting tools at once that can be individually indexed to the workpiece.

H.Compound Rest Handwheel: Moves the tool toward and away from the workpiece at the preset angle of the compound rest.

I.Thread Dial: Indicates when to engage the half nut during threading operations.

J.Half Nut Lever: Engages/disengages half nut for power feed and threading operations.

K.Cross Slide Handwheel: Moves the cross slide toward and away from the workpiece.

L.Carriage Handwheel: Moves the carriage along the bedway.

-5-

Page 7
Image 7
Grizzly MODEL G0765 owner manual Controls Components, Control Panel, Carriage