Grizzly w1702 instruction manual Dust Collection, Shop Preparation

Dust Collection Shop Preparation

USE the correct dust collection system and respirator in your shop. Some wood dust may

cause respiratory illnesses. Ignoring this warning may cause severe personal injury or death.

Make sure that you use an appropriate dust collection system connected to your shaper. You may have to create or modify other shop ducting to achieve the correct dust collection system clearances and airflow. Connect a 3" flexible dust collection hose to the rear of the fence adjustment tube. Use a 3" hose clamp to secure the hose to the tube. See Figure 11.

Fence	Connect
Adjustment	Ducting
Tube	Here

Figure 11. Dust collection connection.

For additional information on the correct dust collection system, additions, or modifications;

contact your Woodstock International dealer for a copy of the Dust Collection Basics handbook and

available accessories.

ONLY allow trained people in your shop! Make sure shop entrances are locked and machines are correctly turned off with lock-out devices when not in use. Otherwise, injury or death can occur.

•Machine Mobility: Use the Model D2057

SHOP FOX® Heavy-Duty Mobile Base so you can make the most out of your shop space by moving the Model W1702 3 HP

Shaper out of the way when not in use. Contact your SHOP FOX® Dealer for price and availability.

•Working Clearances: Consider your current and future shop needs with respect to the machinery and the lumber to be shaped. Allow enough space for safe lumber support as the lumber is fed into the shaper and as it exits the machine.

•Outlets: Make sure the electrical circuits have the capacity to handle the amperage requirements for your Model W1702 3 HP Shaper. Refer to Pages 3 and 8 for more information. Electrical outlets should be located near the shaper, so power or extension cords are clear of high-traffic areas.

ASSEMBLY

-11-