ADJUSTMENTS
Fence Positioning
ADJUSTMENTS
The two fence faces are independently adjustable to allow for different shaping tasks. The fence faces can be set at different positions to remove material from the entire edge of the wood stock or the same position to allow the shaping of part of the edge.
To adjust the fence, do these steps:
1.Loosen the fence mount lock handle located on the side of the fence mount shown in
Figure 22.
2.Adjust the position of the fence by turning the adjustment knob located on the back of the fence mount shown in Figure 22.
3.Once the fence is in the desired position, tighten down the fence mount lock handle.
UNPLUG the power cord before you do any assembly, adjustments, or maintenance tasks! Otherwise, serious personal injury to you or others may occur!
KEEP loose clothing rolled up and out of the way of machinery and keep hair pulled back.
WEAR your safety goggles during any machine assembly, operation, or maintenance. Failure to comply may result in serious personal injury.
Fence Mount
Lock Handle
Adjustment
Knob
Figure 22. Fence mount lock handle.
NOTICE
You can adjust the relative position of the fence mount lock handle head by pulling and rotating the head either clockwise or
NOTICE
DO NOT
