Warranty and Returns
Woodstock International, Inc. warrants all SHOP FOX® machinery to be free of defects from workmanship and materials for a period of 2 years from the date of original purchase by the original owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, lack of maintenance, or to repairs or alterations made or specifically authorized by anyone other than Woodstock International, Inc.
Woodstock International, Inc. will repair or replace, at its expense and at its option, the SHOP FOX® machine or machine part which in normal use has proven to be defective, provided that the original owner returns the product prepaid to the SHOP FOX® factory service center or authorized repair facility designated by our Bellingham, WA office, with proof of their purchase of the product within 2 years, and provides Woodstock International, Inc. reasonable opportunity to verify the alleged defect through inspection. If it is determined there is no defect, or that the defect resulted from causes not within the scope of Woodstock International Inc.'s warranty, then the original owner must bear the cost of storing and returning the product.
This is Woodstock International, Inc.'s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. We do not warrant that SHOP FOX® machinery complies with the provisions of any law or acts. In no event shall Woodstock International, Inc.'s liability under this warranty exceed the purchase price paid for the product, and any legal actions brought against Woodstock International, Inc. shall be tried in the State of Washington, County of Whatcom. We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special or consequential damages arising from the use of our products.
Every effort has been made to ensure that all SHOP FOX® machinery meets high quality and durability standards. We reserve the right to change specifications at any time because of our commitment to continuously improve the quality of our products.
Specifications
Motor Size | 3 HP, 220V, 60 Hz | |
Motor Speed | 3,450 RPM | |
Amps | 18 | |
Spindle Sizes | 1⁄2", 3⁄4", and 1" (Included) | |
1⁄2" Spindle Max Cutter Height W/Bushings, Nuts, and Rub Collar | 2" | |
3⁄4" Spindle Max Cutter Height W/Bushings, Nuts, and Rub Collar | 21⁄2" | |
1" Spindle Max Cutter Height W/Bushings, Nuts, and Rub Collar | 21⁄4" | |
Maximum Cutter Diameter | 51⁄2" | |
Spindle Travel | 3" | |
Spindle Speeds | 7,000 and 10,000 RPM | |
Handwheel Rotation to Spindle Travel | 360º = 0.045" | |
Table W/Extension Wing | 301⁄2" Wide x 281⁄4" Deep | |
Stand | Cabinet Style, Powder Coated Paint | |
Footprint | 21" x 20" | |
Cord | 10' x 12 Gauge | |
Dust Port | 3" | |
Power Transfer | ||
Bearings | Shielded and Permanently Lubricated Ball Bearings | |
Switch | Magnetic with Thermal Overload, Forward and Reverse | |
Shipping Weight | 367 lbs. | |
Machine Weight | 352 lbs. | |
INTRODUCTION
