Haier LCD-42K40-HD, LCD-42K40A-HD Basic Operation, Turning on / OFF LCD TV, Plug & Play, Power on

BASIC OPERATION

TURNING ON / OFF LCD TV

1	Complete the peripheral connections before turning on LCD
2	TV. (Please refer to "CONNECTING LCD TV".)
	Connect LCD TV's AC Power Cord into an AC outlet.
3	Press POWER ON/OFF button on Side Controls of LCD TV
	or on Remote Control to turn it ON. The POWER indicator

will light up (green). Press POWER ON/OFF button again to shift it to stand-by status, the POWER indicator will become red.

NO SIGNAL SHUT OFF

This TV set incorporates the NO SIGNAL SHUT OFF function. If no signal is input in TV mode, "OFF 00:10" will display for about 10 minutes and TV will be turned off automatically.

SIDE CONTROLS

OK

POWER ON/ OFF button

REMOTE CONTROL

POWER ON/

OFF button

PLUG & PLAY

By PLUG & PLAY, when the TV set is powered on for the first time, it will automatically search and preset all the receivable TV programs.

1	Plug the power, connect the antenna, and press Main Power
	ON/OFF button, the TV set will automatically search the
	programs.
2	After programs searching, SHOP MODE menu will appear.
	Press POINT ◄► buttons to select and press OK button
	for SHOP MODE or HOME MODE. Then the pop up menu
	disappears. For the details, please refer to "SHOP MODE"
	on page 38.
3	Auto searching completed and message "AUTO SET-UP
	COMPLETED HAPPY VIEWING!" appears. About 5 seconds

later, the TV set will automatically return to programme position “1”.

Note:

●Message "NO STATION PLEASE CONNECT ANTENNA PLUG!" will appear if there is no TV stations are searched after automatically programs searching.(see Figure A.) Then SHOP MODE menu appears, the same operations as step 2 above will be excuted and returns to normal TV picture.

●Press MENU button while searching programs, message "PLEASE SELECT AND PRESS OK BUTTON" appears (see Figure B), press POINT◄► buttons to select "TEMPORAL CANCEL" or "PERMANENT CANCEL".

-"TEMPORAL CANCEL" to cancel temporary PLUG & PLAY function. The PLUG & PLAY function is actived only in TV mode while turning on the LCD TV.

-"PERMANENT CANCEL" to cancel permanetly PLUG & PLAY function. When turn on television the PLUG & PLAY is not actived.

Press OK button to enter SHOP MODE menu. the same operations as step 2 above will be excuted and returns to normal TV picture.

I AM SEARCHING ALL PROGRAMMES

PLEASE WAIT!

1

MENU : CANCEL

PLEASE SELECT AND PRESS OK BUTTON

HOME MODE	SHOP MODE
: SELECT	OK : ENTER

AUTO SET-UP COMPLETED

HAPPY VIEWING!

Figure A.

NO STATION

PLEASE CONNECT ANTENNA PLUG!

Figure B.

PLEASE SELECT AND PRESS OK BUTTON

TEMPORAL CANCEL	PERMANENT CANCEL
: SELECT	OK : ENTER

17

LCD-K40.indd 17

1/21/2010 10:47:14 AM