41
PC ADJUST
This function is used to adjust the position of image displayed on
screen. It can be selected when the LCD TV could be received
PC signal and in PC mode. (Refer to "SIGNAL MODE COLUMN"
on page 47.)
Press POINT ◄► buttons to enter PC SCREEN menu. It can
be select "AUTO ADJUST", "H-POSITION", "V-POSITION",
"PHASE", "CLOCK" or "AUTO SHUT DOWN" to adjust.
Press POINT ◄► buttons, and the TV automatically detects
incoming signal, and adjust itself to optimize its performance.
If the image is not displayed properly, a manual adjustment is
required (Refer to following adjustments).
Eliminate disorder from the image. Press POINT ◄► buttons to
adjust PHASE. (0~100)
AUTO ADJUST
PHASE
Press POINT ◄► buttons to set AUTO SHUT DOWN ON or OFF.
When PC is switched Off, ''NO SIGNAL'' appears for 30 seconds,
TV will be automatically switched to Backlight off mode.
During Backlight Off Mode within 10 minutes, TV will be switched
to On Mode if PC is switched On.
After Backlight Mode continues for 10 minutes, it will be switched
to Standby Mode. During Standby mode, TV will not be switched
to On mode even if PC is switched On.
To switch on TV, press Power button on Remote Control or TV.
AUTO SHUT DOWN
Note:
This function is for PC mode (full screen) only. It is not applicable
for PIP/POP dual pictures.
MENU OPERATION (PC mode)SETUP
■ Press BACK button to return to the previous menu.
■ Press MENU button or wait for 5~60 seconds (refer to
"DURATION" on page 36) to exit menu operation.
SETUP MENU
1
2
Press MENU button and the main menu will appear.
Press POINT ◄► buttons to select SETUP.
Press POINT ▼ buttons to enter into SETUP menu.
Press POINT ▲▼ buttons to select the item desired.
3
Press POINT ◄► buttons to enter the item selected.
4
SETUP
CHILD LOCK ON
ECO SENSOR
DYNAMIC AI ON
ACTIVE CONTRAST ON
GAME MODE OFF
GAME INPUT SEL HDMI1
HDMI LINK
PC ADJUST
SHOP MODE
SELECT ADJUST BACK EXIT
:: ::
SETUP
CHILD LOCK ON
ECO SENSOR
DYNAMIC AI ON
ACTIVE CONTRAST ON
GAME MODE OFF
GAME INPUT SEL HDMI1
HDMI LINK
PC ADJUST
SHOP MODE
SELECT ADJUST BACK EXIT
:: ::
Note:
For the details, please refer to "SETUP" on pages 37-38.
SETUP
AUTO ADJUST
AUTO SHUT DOWN ON
PC ADJUST
V - POSITION
CLOCK
PHASE
H - POSITION
SELECT ADJUST BACK EXIT
:: ::
The horizontal picture position will be moved to the left side by
pressing POINT ◄ button. And it will be moved to the right side by
pressing POINT ► button. (0~100)
The vertical picture position will be moved down side by pressing
POINT ◄ button. And it will be moved up side by pressing POINT
► button. (0~100)
H-POSITION
V-POSITION
Eliminate flicker from the image. Press POINT ◄► buttons to
adjust CLOCK. (0~100)
CLOCK AUTO ADJUST
LCD-K40.indd 41 1/21/2010 10:47:30 AM