9
CONNECTING LCD TV

INSTALLING STAND

Be careful of the panel. Suggest to put down the
panel side on the cushion or other soft material
before installing the stand.
To align the corresponding pilot holes and fix the
stand by screws.
Screws B for LCD-32K40/A: 4 pcs
Screws A for LCD-42K40/A-HD: 2 pcs
Screws B for LCD-42K40/A-HD: 4 pcs
Please according to the following procedure to install
stand.
2
1
Installing of stand is completed.
3

Note:

Screws A are just for LCD-42K40/A-HD.
A
B
B
This LCD TV uses nominal input voltages of 110-240V
AC. This LCD TV automatically selects the correct
input voltage. It is designed to work with single-
phase power systems. To reduce risk of electrical
shock, do not plug into any other type of power
system. Consult your authorized dealer or service
station if you are not sure of the type of power being
supplied.
Connect the LCD TV with all peripheral equipment
before turning the LCD TV on.
CAUTION
For safety, unplug AC power cord when the LCD
TV is not in use.

CONNECTING AC POWER CORD

To the AC Outlet (110 - 240V AC).
Pulls the
AC power cord out from the LCD TV.
The
AC outlet must be near this equipment and
must be easily accessible.

AC POWER CORD

LCD-K40.indd 9 1/21/2010 10:47:07 AM